The Cause of Basement Becomes Damp

Basement becomes part of the house which is quite difficult to manage because often experience problems related to the environment that is often “wet” or too damp.

The causes can vary, but the most common are condensation, leakage, and swelling of groundwater. That’s why you need to make your home basement become waterproof.

There are three main causes of the damp situation in the basement, namely condensation, leakage, and swelling of groundwater. Condensation occurs moist air meets a dry wall foundation.

If you see water stains on the walls and basement floors, you may have a condensation problem. Check it out by sticking the plastic wrap on a damp area and leave it for a few days.

When dew appears on the plastic, there has been a leak, while condensation occurs when the dew appears outside the plastic.

Meanwhile, the leak occurred due to the absence of proper distribution for rain water.

Hydro-static pressure pushes water through parts or cracks in the walls. In contrast to the swelling of the soil that occurs when the water level has exceeded its highest point.

The soil around your house is no longer able to withstand excess amounts of water, so swelling occurs. If your basement is wet with this problem, get ready to deal with it for a long time.

Actually there is a system that can handle the problem of this groundwater swelling, but the installation requires a relatively expensive cost.

Immediately Handle Knowing Once

It is important that you immediately deal with wet or damp basement issues as soon as you know it.

Not only for the sake of convenience, it is also crucial for your home structure. There are quite a few ways to deal with this problem.

The first way is to find out what kind of problems you are facing, whether condensation, leakage, or anything else.

Then, check the area around your house, there might be a leaky pipe or a cracked wall. Immediately solve the problems you encounter, as well as patch the cracks that may be found on the walls and basement floors.

Apply Special Sealer

Sealer can function to coat the walls and floors in your basement, usually sealer intended for concrete. This one tool is quite easy to apply, especially there are always instructions that accompany each product.

Although it can be applied on a damp surface, you still have to take further steps if you find a puddle in a certain area of ​​your basement.

If it does happen, the sign is a more serious problem than just a cracked wall. Do not hesitate to call for help in remodeling basement northern va services if you cannot handle it yourself.

Polyethylene Membrane

In addition to the sealer, there is another solution that you can use to coat the walls and floors in the basement, i.e. polyethylene membrane.

Its basic function may be to keep water from seeping and leaking to the surface, but a polyethylene membrane can help you to install channels and pump water deposition to be collected and removed through the back of the membrane.

Because of its use that tends to be more complicated than sealer, you are advised to seek expert opinion whether you really need the installation of this polyethylene membrane.

Although it is located at the very bottom of the house and tends to be invisible, from the outside, it does not mean you can leave the basement without any treatment.

Basement precisely has a higher risk for condensation or leakage, so the atmosphere is damp. One of the most appropriate solutions is to make your basement become waterproof through the above ways.